This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

Sunroof
Full qualified VSS Path: Vehicle.Cabin.Sunroof
Description: Sun roof status.
flowchart LR Vehicle-->Cabin Cabin-->Sunroof

Digital Auto: Playground

playground.digital.auto provides an in-browser, rapid prototyping environment utilizing the COVESA APIs for connected vehicles.

Vehicle Model Direct link to Vehicle Signal
ACME Car (EV) v0.1 Vehicle.Cabin.Sunroof

Signal Information

The vehicle signal Vehicle.Cabin.Sunroof is a Branch.

Children

This vehicle signal is a branch or structure and thus has sub-pages:

Feedback

Do you think this Vehicle Signal specification needs enhancement? Do you want to discuss with experts? Try the following ressources to get in touch with the VSS community:
Enhancement request Create COVESA GitHub Issue
Join COVESA www.covesa.global
Discuss VSS on Slack w3cauto.slack.com
VSS Data Experts on Google Groups covesa.global data-expert-group

About VSS

The Vehicle Signal Specification (VSS) is an initiative by COVESA to define a syntax and a catalog for vehicle signals. The source code and releases can be found in the VSS github repository.

1 - Position
Full qualified VSS Path: Vehicle.Cabin.Sunroof.Position
Description: Sunroof position. 0 = Fully closed 100 = Fully opened. -100 = Fully tilted.
flowchart LR Vehicle-->Cabin Cabin-->Sunroof Sunroof-->Position

Eclipse Leda: Usage Example

In Eclipse Kuksa.VAL Databroker CLI:

$ databroker-cli
sdv.databroker.v1 > connect
[connect] OK
sdv.databroker.v1 > get Vehicle.Cabin.Sunroof.Position
[get]  OK
Vehicle.Cabin.Sunroof.Position: ( NotAvailable )
sdv.databroker.v1 > set Vehicle.Cabin.Sunroof.Position 0
[set]  OK

Digital Auto: Playground

playground.digital.auto provides an in-browser, rapid prototyping environment utilizing the COVESA APIs for connected vehicles.

Vehicle Model Direct link to Vehicle Signal
ACME Car (EV) v0.1 Vehicle.Cabin.Sunroof.Position

Data Type & Unit
Path Vehicle.Cabin.Sunroof.Position VSS: Addressing nodes
Data type int8 VSS: Datatypes
Unit percent VSS: Units
Label percent
Description Relation measured in percent VSS: Sensors & Actuators
Domain relation
Minimum value -100 VSS: Sensors & Actuators
Maximum value 100 VSS: Sensors & Actuators

Note: The int8 datatype is a signed 8-bit integer which technically allows values between -128 and 127 (inclusive).

Signal Information

The vehicle signal Vehicle.Cabin.Sunroof.Position is a Sensor.

The vehicle signal Vehicle.Cabin.Sunroof.Position is a Signal.

Feedback

Do you think this Vehicle Signal specification needs enhancement? Do you want to discuss with experts? Try the following ressources to get in touch with the VSS community:
Enhancement request Create COVESA GitHub Issue
Join COVESA www.covesa.global
Discuss VSS on Slack w3cauto.slack.com
VSS Data Experts on Google Groups covesa.global data-expert-group

About VSS

The Vehicle Signal Specification (VSS) is an initiative by COVESA to define a syntax and a catalog for vehicle signals. The source code and releases can be found in the VSS github repository.

Supported datatypes

The following is a list of VSS supported built-in datatypes:

Name Type Min Max
uint8 unsigned 8-bit integer 0 255
int8 signed 8-bit integer -128 127
uint16 unsigned 16-bit integer 0 65535
int16 signed 16-bit integer -32768 32767
uint32 unsigned 32-bit integer 0 4294967295
int32 signed 32-bit integer -2147483648 2147483647
uint64 unsigned 64-bit integer 0 2^64 - 1
int64 signed 64-bit integer -2^63 2^63 - 1
boolean boolean value 0/false 1/true
float floating point number -3.4e -38 3.4e 38
double double precision floating point number -1.7e -300 1.7e 300
string character string n/a n/a

Min, max and default values defined in a Vehicle Signal Specification must be in the supported range of the data type.

2 - Shade
Full qualified VSS Path: Vehicle.Cabin.Sunroof.Shade
Description: Sun roof shade status. Open = Retracted, Closed = Deployed. Start position for Sunroof.Shade is Open/Retracted.
flowchart LR Vehicle-->Cabin Cabin-->Sunroof Sunroof-->Shade

Digital Auto: Playground

playground.digital.auto provides an in-browser, rapid prototyping environment utilizing the COVESA APIs for connected vehicles.

Vehicle Model Direct link to Vehicle Signal
ACME Car (EV) v0.1 Vehicle.Cabin.Sunroof.Shade

Signal Information

The vehicle signal Vehicle.Cabin.Sunroof.Shade is a Branch.

Children

This vehicle signal is a branch or structure and thus has sub-pages:

Feedback

Do you think this Vehicle Signal specification needs enhancement? Do you want to discuss with experts? Try the following ressources to get in touch with the VSS community:
Enhancement request Create COVESA GitHub Issue
Join COVESA www.covesa.global
Discuss VSS on Slack w3cauto.slack.com
VSS Data Experts on Google Groups covesa.global data-expert-group

About VSS

The Vehicle Signal Specification (VSS) is an initiative by COVESA to define a syntax and a catalog for vehicle signals. The source code and releases can be found in the VSS github repository.

2.1 - IsOpen
Full qualified VSS Path: Vehicle.Cabin.Sunroof.Shade.IsOpen
Description: Is item open or closed? True = Fully or partially open. False = Fully closed.
flowchart LR Vehicle-->Cabin Cabin-->Sunroof Sunroof-->Shade Shade-->IsOpen

Eclipse Leda: Usage Example

In Eclipse Kuksa.VAL Databroker CLI:

$ databroker-cli
sdv.databroker.v1 > connect
[connect] OK
sdv.databroker.v1 > get Vehicle.Cabin.Sunroof.Shade.IsOpen
[get]  OK
Vehicle.Cabin.Sunroof.Shade.IsOpen: ( NotAvailable )
sdv.databroker.v1 > set Vehicle.Cabin.Sunroof.Shade.IsOpen false
[set]  OK

Digital Auto: Playground

playground.digital.auto provides an in-browser, rapid prototyping environment utilizing the COVESA APIs for connected vehicles.

Vehicle Model Direct link to Vehicle Signal
ACME Car (EV) v0.1 Vehicle.Cabin.Sunroof.Shade.IsOpen

Data Type & Unit
Path Vehicle.Cabin.Sunroof.Shade.IsOpen VSS: Addressing nodes
Data type boolean VSS: Datatypes

Note: The boolean datatype is a boolean value which technically allows values of either 0 and false; or 1 and true.

Signal Information

The vehicle signal Vehicle.Cabin.Sunroof.Shade.IsOpen is an Actuator.

The vehicle signal Vehicle.Cabin.Sunroof.Shade.IsOpen is a Signal.

Feedback

Do you think this Vehicle Signal specification needs enhancement? Do you want to discuss with experts? Try the following ressources to get in touch with the VSS community:
Enhancement request Create COVESA GitHub Issue
Join COVESA www.covesa.global
Discuss VSS on Slack w3cauto.slack.com
VSS Data Experts on Google Groups covesa.global data-expert-group

About VSS

The Vehicle Signal Specification (VSS) is an initiative by COVESA to define a syntax and a catalog for vehicle signals. The source code and releases can be found in the VSS github repository.

Supported datatypes

The following is a list of VSS supported built-in datatypes:

Name Type Min Max
uint8 unsigned 8-bit integer 0 255
int8 signed 8-bit integer -128 127
uint16 unsigned 16-bit integer 0 65535
int16 signed 16-bit integer -32768 32767
uint32 unsigned 32-bit integer 0 4294967295
int32 signed 32-bit integer -2147483648 2147483647
uint64 unsigned 64-bit integer 0 2^64 - 1
int64 signed 64-bit integer -2^63 2^63 - 1
boolean boolean value 0/false 1/true
float floating point number -3.4e -38 3.4e 38
double double precision floating point number -1.7e -300 1.7e 300
string character string n/a n/a

Min, max and default values defined in a Vehicle Signal Specification must be in the supported range of the data type.

2.2 - Position
Full qualified VSS Path: Vehicle.Cabin.Sunroof.Shade.Position
Description: Item position. 0 = Start position 100 = End position.
Comment: Relationship between Open/Close and Start/End position is item dependent.
flowchart LR Vehicle-->Cabin Cabin-->Sunroof Sunroof-->Shade Shade-->Position

Eclipse Leda: Usage Example

In Eclipse Kuksa.VAL Databroker CLI:

$ databroker-cli
sdv.databroker.v1 > connect
[connect] OK
sdv.databroker.v1 > get Vehicle.Cabin.Sunroof.Shade.Position
[get]  OK
Vehicle.Cabin.Sunroof.Shade.Position: ( NotAvailable )
sdv.databroker.v1 > set Vehicle.Cabin.Sunroof.Shade.Position 0
[set]  OK

Digital Auto: Playground

playground.digital.auto provides an in-browser, rapid prototyping environment utilizing the COVESA APIs for connected vehicles.

Vehicle Model Direct link to Vehicle Signal
ACME Car (EV) v0.1 Vehicle.Cabin.Sunroof.Shade.Position

Data Type & Unit
Path Vehicle.Cabin.Sunroof.Shade.Position VSS: Addressing nodes
Data type uint8 VSS: Datatypes
Unit percent VSS: Units
Label percent
Description Relation measured in percent VSS: Sensors & Actuators
Domain relation
Minimum value 0 VSS: Sensors & Actuators
Maximum value 100 VSS: Sensors & Actuators

Note: The uint8 datatype is an unsigned 8-bit integer which technically allows values between 0 and 255 (inclusive).

Signal Information

The vehicle signal Vehicle.Cabin.Sunroof.Shade.Position is an Actuator.

The vehicle signal Vehicle.Cabin.Sunroof.Shade.Position is a Signal.

Feedback

Do you think this Vehicle Signal specification needs enhancement? Do you want to discuss with experts? Try the following ressources to get in touch with the VSS community:
Enhancement request Create COVESA GitHub Issue
Join COVESA www.covesa.global
Discuss VSS on Slack w3cauto.slack.com
VSS Data Experts on Google Groups covesa.global data-expert-group

About VSS

The Vehicle Signal Specification (VSS) is an initiative by COVESA to define a syntax and a catalog for vehicle signals. The source code and releases can be found in the VSS github repository.

Supported datatypes

The following is a list of VSS supported built-in datatypes:

Name Type Min Max
uint8 unsigned 8-bit integer 0 255
int8 signed 8-bit integer -128 127
uint16 unsigned 16-bit integer 0 65535
int16 signed 16-bit integer -32768 32767
uint32 unsigned 32-bit integer 0 4294967295
int32 signed 32-bit integer -2147483648 2147483647
uint64 unsigned 64-bit integer 0 2^64 - 1
int64 signed 64-bit integer -2^63 2^63 - 1
boolean boolean value 0/false 1/true
float floating point number -3.4e -38 3.4e 38
double double precision floating point number -1.7e -300 1.7e 300
string character string n/a n/a

Min, max and default values defined in a Vehicle Signal Specification must be in the supported range of the data type.

2.3 - Switch
Full qualified VSS Path: Vehicle.Cabin.Sunroof.Shade.Switch
Description: Switch controlling sliding action such as window, sunroof, or blind.
flowchart LR Vehicle-->Cabin Cabin-->Sunroof Sunroof-->Shade Shade-->Switch

Eclipse Leda: Usage Example

In Eclipse Kuksa.VAL Databroker CLI:

$ databroker-cli
sdv.databroker.v1 > connect
[connect] OK
sdv.databroker.v1 > get Vehicle.Cabin.Sunroof.Shade.Switch
[get]  OK
Vehicle.Cabin.Sunroof.Shade.Switch: ( NotAvailable )
sdv.databroker.v1 > set Vehicle.Cabin.Sunroof.Shade.Switch Foo
[set]  OK

Digital Auto: Playground

playground.digital.auto provides an in-browser, rapid prototyping environment utilizing the COVESA APIs for connected vehicles.

Vehicle Model Direct link to Vehicle Signal
ACME Car (EV) v0.1 Vehicle.Cabin.Sunroof.Shade.Switch

Data Type & Unit
Path Vehicle.Cabin.Sunroof.Shade.Switch VSS: Addressing nodes
Data type string VSS: Datatypes
Allowed values ['INACTIVE', 'CLOSE', 'OPEN', 'ONE_SHOT_CLOSE', 'ONE_SHOT_OPEN'] VSS: Specifying allowed values

Note: The string datatype is a character string.

Signal Information

The vehicle signal Vehicle.Cabin.Sunroof.Shade.Switch is an Actuator.

The vehicle signal Vehicle.Cabin.Sunroof.Shade.Switch is a Signal.

Feedback

Do you think this Vehicle Signal specification needs enhancement? Do you want to discuss with experts? Try the following ressources to get in touch with the VSS community:
Enhancement request Create COVESA GitHub Issue
Join COVESA www.covesa.global
Discuss VSS on Slack w3cauto.slack.com
VSS Data Experts on Google Groups covesa.global data-expert-group

About VSS

The Vehicle Signal Specification (VSS) is an initiative by COVESA to define a syntax and a catalog for vehicle signals. The source code and releases can be found in the VSS github repository.

Supported datatypes

The following is a list of VSS supported built-in datatypes:

Name Type Min Max
uint8 unsigned 8-bit integer 0 255
int8 signed 8-bit integer -128 127
uint16 unsigned 16-bit integer 0 65535
int16 signed 16-bit integer -32768 32767
uint32 unsigned 32-bit integer 0 4294967295
int32 signed 32-bit integer -2147483648 2147483647
uint64 unsigned 64-bit integer 0 2^64 - 1
int64 signed 64-bit integer -2^63 2^63 - 1
boolean boolean value 0/false 1/true
float floating point number -3.4e -38 3.4e 38
double double precision floating point number -1.7e -300 1.7e 300
string character string n/a n/a

Min, max and default values defined in a Vehicle Signal Specification must be in the supported range of the data type.

3 - Switch
Full qualified VSS Path: Vehicle.Cabin.Sunroof.Switch
Description: Switch controlling sliding action such as window, sunroof, or shade.
flowchart LR Vehicle-->Cabin Cabin-->Sunroof Sunroof-->Switch

Eclipse Leda: Usage Example

In Eclipse Kuksa.VAL Databroker CLI:

$ databroker-cli
sdv.databroker.v1 > connect
[connect] OK
sdv.databroker.v1 > get Vehicle.Cabin.Sunroof.Switch
[get]  OK
Vehicle.Cabin.Sunroof.Switch: ( NotAvailable )
sdv.databroker.v1 > set Vehicle.Cabin.Sunroof.Switch Foo
[set]  OK

Digital Auto: Playground

playground.digital.auto provides an in-browser, rapid prototyping environment utilizing the COVESA APIs for connected vehicles.

Vehicle Model Direct link to Vehicle Signal
ACME Car (EV) v0.1 Vehicle.Cabin.Sunroof.Switch

Data Type & Unit
Path Vehicle.Cabin.Sunroof.Switch VSS: Addressing nodes
Data type string VSS: Datatypes
Allowed values ['INACTIVE', 'CLOSE', 'OPEN', 'ONE_SHOT_CLOSE', 'ONE_SHOT_OPEN', 'TILT_UP', 'TILT_DOWN'] VSS: Specifying allowed values

Note: The string datatype is a character string.

Signal Information

The vehicle signal Vehicle.Cabin.Sunroof.Switch is an Actuator.

The vehicle signal Vehicle.Cabin.Sunroof.Switch is a Signal.

Feedback

Do you think this Vehicle Signal specification needs enhancement? Do you want to discuss with experts? Try the following ressources to get in touch with the VSS community:
Enhancement request Create COVESA GitHub Issue
Join COVESA www.covesa.global
Discuss VSS on Slack w3cauto.slack.com
VSS Data Experts on Google Groups covesa.global data-expert-group

About VSS

The Vehicle Signal Specification (VSS) is an initiative by COVESA to define a syntax and a catalog for vehicle signals. The source code and releases can be found in the VSS github repository.

Supported datatypes

The following is a list of VSS supported built-in datatypes:

Name Type Min Max
uint8 unsigned 8-bit integer 0 255
int8 signed 8-bit integer -128 127
uint16 unsigned 16-bit integer 0 65535
int16 signed 16-bit integer -32768 32767
uint32 unsigned 32-bit integer 0 4294967295
int32 signed 32-bit integer -2147483648 2147483647
uint64 unsigned 64-bit integer 0 2^64 - 1
int64 signed 64-bit integer -2^63 2^63 - 1
boolean boolean value 0/false 1/true
float floating point number -3.4e -38 3.4e 38
double double precision floating point number -1.7e -300 1.7e 300
string character string n/a n/a

Min, max and default values defined in a Vehicle Signal Specification must be in the supported range of the data type.