WiperWear
| Full qualified VSS Path: | Vehicle.Body.Windshield.Rear.Wiping.WiperWear |
| Description: | Wiper wear as percent. 0 = No Wear. 100 = Worn. Replacement required. Method for calculating or estimating wiper wear is vehicle specific. For windshields with multiple wipers the wear reported shall correspond to the most worn wiper. |
Navigation
Eclipse Leda: Usage Example
In Eclipse Kuksa.VAL Databroker CLI:
$ databroker-cli
sdv.databroker.v1 > connect
[connect] OK
sdv.databroker.v1 > get Vehicle.Body.Windshield.Rear.Wiping.WiperWear
[get] OK
Vehicle.Body.Windshield.Rear.Wiping.WiperWear: ( NotAvailable )
sdv.databroker.v1 > set Vehicle.Body.Windshield.Rear.Wiping.WiperWear 0
[set] OK
Digital Auto: Playground
playground.digital.auto provides an in-browser, rapid prototyping environment utilizing the COVESA APIs for connected vehicles.
| Vehicle Model | Direct link to Vehicle Signal |
|---|---|
| ACME Car (EV) v0.1 | Vehicle.Body.Windshield.Rear.Wiping.WiperWear |
Data Type & Unit
| Path | Vehicle.Body.Windshield.Rear.Wiping.WiperWear |
VSS: Addressing nodes |
| Data type | uint8 |
VSS: Datatypes |
| Maximum value | 100 |
VSS: Sensors & Actuators |
Note: The uint8 datatype is an unsigned 8-bit integer which technically allows values between 0 and 255 (inclusive).
Signal Information
The vehicle signal Vehicle.Body.Windshield.Rear.Wiping.WiperWear is a Sensor.
The vehicle signal Vehicle.Body.Windshield.Rear.Wiping.WiperWear is a Signal.
UUID
Each vehicle signal is identified by a Universally Unique Identifier (UUID)
The UUID for Vehicle.Body.Windshield.Rear.Wiping.WiperWear is afd6a352230f5eeaa8ac5f1f188bfd33
Feedback
Do you think this Vehicle Signal specification needs enhancement? Do you want to discuss with experts? Try the following ressources to get in touch with the VSS community:
| Enhancement request | Create COVESA GitHub Issue |
| Join COVESA | www.covesa.global |
| Discuss VSS on Slack | w3cauto.slack.com |
| VSS Data Experts on Google Groups | covesa.global data-expert-group |
About VSS
The Vehicle Signal Specification (VSS) is an initiative by COVESA to define a syntax and a catalog for vehicle signals. The source code and releases can be found in the VSS github repository.
Supported datatypes
The following is a list of VSS supported built-in datatypes:
| Name | Type | Min | Max |
|---|---|---|---|
| uint8 | unsigned 8-bit integer | 0 | 255 |
| int8 | signed 8-bit integer | -128 | 127 |
| uint16 | unsigned 16-bit integer | 0 | 65535 |
| int16 | signed 16-bit integer | -32768 | 32767 |
| uint32 | unsigned 32-bit integer | 0 | 4294967295 |
| int32 | signed 32-bit integer | -2147483648 | 2147483647 |
| uint64 | unsigned 64-bit integer | 0 | 2^64 - 1 |
| int64 | signed 64-bit integer | -2^63 | 2^63 - 1 |
| boolean | boolean value | 0/false | 1/true |
| float | floating point number | -3.4e -38 | 3.4e 38 |
| double | double precision floating point number | -1.7e -300 | 1.7e 300 |
| string | character string | n/a | n/a |
Min, max and default values defined in a Vehicle Signal Specification must be in the supported range of the data type.
Feedback
Was this page helpful?
Glad to hear it! Please tell us how we can improve.
Sorry to hear that. Please tell us how we can improve.